Blogs Detail
All type of Truck Tyre
How to Change a Flat Truck Tyre: Rocklea Tyre Experts Talk
Changing a flat truck tyre is a straightforward process but it needs some physical strength and knowledge of the steps involved. That’s why new truck drivers in Australia often struggle to change a flat truck tyre.
Amigo Tyres - one of the leading tyre repair shops in Rocklea - created this blog to share step-by-step guidance on how to change a flat truck tyre. Let’s start with the tools and materials needed for a successful truck tyre change!
Change Flat Truck Tyre: Tools Needed
Below tools and materials are required for changing a flat truck tyre:
-
Spare tyre
-
Jack
-
Lug wrench
-
Wheel Chocks
-
Vehicle owner’s manual
Change Flat Truck Tyre: Step-by-Step Guide
The below step-by-step guide will help you change your flat truck tyre:
Park in a safe location: The step of changing your flat truck tyre is to park your truck in a safe and flat location far from traffic. Turn on the indicator lights and pull the parking brake. This is important for the safety of others!
Place wheel chocks: The next step after parking your truck in a safe location is to place the wheel chocks behind and in front of the tyre opposite the flat one. Another safety tip to take care of before starting the car or truck tyre change.
Learn everything about truck mobile tyre services in Rocklea!
Get tools and spare tyre: Bring the spare tyre, lug wrench, and jack from the storage location in your truck. You can also consult the owner’s manual for guidance.
Loosen lug nuts: Get the lug wrench and start on the lug nuts but avoid removing them completely for now. Losing them while the truck is on the ground is one of the easiest ways to lose them.
Place the jack: You will find lifting spots under the truck frame. However, if you are changing a flat truck tyre for the first time, it might be hard to locate. So, consult the manual guide to find the right lifting spot. Place the jack where it should be, and start lifting until the flat tyre goes slightly above the ground.
Remove flat tyre: Remove the loose lug nuts and take off the flat truck tyre carefully. Make sure the jack is placed properly and the truck is lifted in the right way before removing the flat tyre from your truck. Get help from someone if the tyre seems too heavy to manage on your own.
Discover everything about truck wheel alignment in Rocklea!
Install spare tyre: Finally, it’s time to install the spare tyre. Place the spare tyre onto the wheel studs and start tightening the lug nuts to secure the spare tyre onto the studs.
Tighten lug nuts: Use your lug wrench to tighten the lug nuts as much as possible in a crisscross pattern. Now, lower your truck with the jack once you are done with tightening the lug nuts.
Check tyre pressure: Make sure the spare tyre you fitted has enough tyre pressure. Adjust the pressure if needed. Place the tools and flat truck tyre in the storage of your truck.
Visit a tyre shop: Once you have double-checked everything, it’s time to find a truck tyre shop to get the damaged tyre fixed. Getting your new truck tyre checked by a professional is important too since it will help you make sure that the spare is suitable for continuous use.
Get Flat Truck Tyre Fixed from Amigo Tyres, Rocklea
We hope that the above post helped you learn how to change flat truck tyres on your own. If your truck tyre went flat in or near Rocklea, visit Amigo Tyres for fast truck tyre repair services. We will get you going in no time!
Got any queries to ask? Contact us to get them answered by our truck tyre experts.
Don’t forget to check out our most loved services in Rocklea:
Also, read our recently published blogs:
Tips to buy lorry tyres for the first time
Everything about tube vs tubeless tyres
Prepare truck tyres for winter and snowBuy offroad truck wheels and tyres: Things to keep in mind
